AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100

Note: The option for the Ethernet cable connection that is stated onscreen applies to a cable or fiber Internet connection only (see Set Up Your Modem Router for Cable or Fiber Service on page 26).

Take one of the following actions:

If you already power-cycled the DSL modem (see Step 1 through Step 6), do the following:

a.Select the None of the above radio button.

b.Click the Next button.

If you did not yet power-cycle the DSL modem:

a.Unplug your DSL modem’s power, leaving the DSL modem connected to the wall jack for your Internet service.

b.If your DSL modem includes a battery backup, remove the battery.

c.Wait 10 seconds.

d.If your DSL modem includes a battery backup, reinsert the battery.

e.Plug in your DSL modem’s power and turn on your DSL modem.

f.Wait two minutes.

g.Select the I just power cycled the modem and waited for 2 minutes radio button.

h.Click the Next button.

19.(Only if the following screen displays) Specify how to manage problems with the detection of the IP address for the Internet connection.

The screen that might display states that a problem occurred while detecting the Internet connection IP address.

Install and Access the Modem Router and Its Network

24

Page 24
Image 24
NETGEAR D6100 user manual Install and Access the Modem Router and Its Network