NETGEAR DG824M manual Chapter Advanced Configuration

Activation and Administration	5-12
Dropped Packets	5-12
Enabling Security Event E-mail Notification	5-13
Running Diagnostic Utilities and Rebooting the Router	5-15
Enabling Remote Management	5-16
Chapter 6
Advanced Configuration
Configuring Advanced Security	6-1
Setting Up A Default DMZ Server	6-1
Respond to Ping on Internet WAN Port	6-2
Configuring LAN IP Settings	6-3
LAN TCP/IP Setup	6-3
MTU Size	6-4
DHCP	6-5
Reserved IP addresses	6-6
Configuring Dynamic DNS	6-7
Using Static Routes	6-9
Static Route Example	6-9
Chapter 7
Troubleshooting
Basic Functioning	7-1
Power LED Not On	7-2
Test LED Never Turns On or Test LED Stays On	7-2
LAN or WAN Port LEDs Not On	7-2
Troubleshooting the Web Configuration Interface	7-3
Troubleshooting the ISP Connection	7-4
ADSL link	7-4
WAN LED Blinking Yellow	7-4
WAN LED Off	7-5
Obtaining a WAN IP Address	7-5
Troubleshooting PPPoE or PPPoA	7-6
Troubleshooting Internet Browsing	7-6
Troubleshooting a TCP/IP Network Using the Ping Utility	7-7
Testing the LAN Path to Your Router	7-7
Testing the Path from Your PC to a Remote Device	7-8
Contents	vii