N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

IP Address. The IP address being used by the Internet (WAN) port of the wireless modem router. If no address is shown or the address is 0.0.0, the wireless modem router cannot connect to the Internet.

Active Connection. This shows if the wireless modem router is using a fixed IP address on the WAN. If the value is DHCP Client, the wireless modem router obtains an IP address dynamically from the ISP.

IP Subnet Mask. The IP subnet mask being used by the Internet (WAN) port of the wireless modem router.

Domain Name Server. The Domain Name Server addresses being used by the wireless modem router. A Domain Name Server translates human-language URLs such as www.netgear.com into IP addresses.

Show Statistics Button

On the Router Status screen, in the Internet Port pane, click the Show Statistics button to display the following screen:

Figure 9. System up time and poll interval statistics

System Up Time. The time elapsed since the wireless modem router was last restarted.

Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the screen displays:

Status. The link status of the port.

TxPkts. The number of packets transmitted on this port since reset or manual clear.

RxPkts. The number of packets received on this port since reset or manual clear.

Collisions. The number of collisions on this port since reset or manual clear.

Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN ports.

Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN ports.

Up Time. The time elapsed since this port acquired the link.

Poll Interval. The interval at which the statistics are updated in this screen.

Administration

88

Page 88
Image 88
NETGEAR DGND4000-100NAS user manual Show Statistics Button, System up time and poll interval statistics