N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

You have problems connecting to your ISP or other Internet service, and the technical support of either the ISP or NETGEAR recommends changing the MTU setting. These web-based applications might require an MTU change:

-A secure website that does not open, or displays only part of a web page

-Yahoo email

-MSN portal

-America Online’s DSL service

You use VPN and have severe performance problems.

You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems.

Note: An incorrect MTU setting can cause Internet communication problems such as the inability to access certain websites, frames within websites, secure login pages, or FTP or POP servers.

If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are willing to experiment, you can gradually reduce the MTU from the maximum value of 1500 until the problem goes away. The following table describes common MTU sizes and applications.

Table 11. Common MTU sizes

MTU

Application

 

 

1500

The largest Ethernet packet size and the default value. This is the typical setting for

 

non-PPPoE, non-VPN connections, and is the default value for NETGEAR wireless

 

modem routers, adapters, and switches.

 

 

1492

Used in PPPoE environments.

 

 

1472

Maximum size to use for pinging. (Larger packets are fragmented.)

 

 

1468

Used in some DHCP environments.

 

 

1460

Usable by AOL if you do not have large email attachments, for example.

 

 

1436

Used in PPTP environments or with VPN.

 

 

1400

Maximum size for AOL DSL.

 

 

576

Typical value to connect to dial-up ISPs.

 

 

To change the MTU size:

1.Select ADVANCED > Setup > WAN Setup.

2.In the MTU Size field, enter a new size from 64 through 1500.

3.Click Apply to save the settings.

NETGEAR genie ADVANCED Home

52

Page 52
Image 52
NETGEAR DGND4000-100NAS user manual  To change the MTU size Select Advanced Setup WAN Setup, Common MTU sizes