USB Drive Requirements, ReadySHARE Access | NETGEAR DGND4000-100NAS

N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000

USB Drive Requirements

The wireless modem router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards. The approximate USB bus speeds are shown in the following table. Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network, and other variables.

Table 12. USB drive speeds

Bus

USB 1.1

USB 2.0

Speed/Sec

12Mbits

480Mbits

The wireless modem router should work with most USB-compliant external flash and hard drives. For the most up-to-date list of USB drives supported by the wireless modem router, visit:

http://kbserver.netgear.com/readyshare

The wireless modem router supports both read and write access for FAT16, FAT32, NTFS, and Linux file systems (EXT2 and EXT3).

Note: Some USB external hard drives and flash drives require drivers to be loaded into the computer before the computer can access the USB device. Such USB devices do not work with the wireless modem router.

ReadySHARE Access

Once you have set up your wireless modem router, you can connect any USB storage device and share the contents with other users on your network.

You can access your USB device in any of the following ways:

•On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, select Start > Run, and enter \\readyshare in the dialog box. Click OK.

•On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, open Internet Explorer or Safari, and enter \\readyshare in the address bar.

•On Mac OS X (version 10.2 or later), enter smb://readyshare in the address bar.

•In My Network Places, enter \\readyshare in the address bar.

USB Storage

62

Image 62

NETGEAR DGND4000-100NAS user manual USB Drive Requirements, ReadySHARE Access

Contents

USA Support Trademarks Contents USB Printer Control Administration Appendix a Supplemental Information Hardware Setup Product Specifications Unpack Your New Router N750 Wireless Dual Band Gigabit Adsl Modem Router DGND4000 Box contents Hardware Setup Unpack Your New Router Hardware Features Label Back Panel Back panel port connections Front Panel Front panel LEDs Wireless button GHz Wireless LED Position Your Wireless Router Power On/Off LED Adsl Microfilters One-Line Adsl Microfilter Not Included Summary Cable Your N750 Wireless Modem RouterTwo-Line Adsl Microfilter Included Verify the Cabling Connect to Internet with Adsl or Ethernet WAN Get Started with Netgear genie Wireless Devices and Security Settings Prepare to Set Up the Wireless Modem RouterTypes of Logins and Access Use Standard TCP/IP Properties for Dhcp Browse to http//routerlogin.net Netgear genie Setup To use Netgear genie to set up your wireless modem router  If the browser cannot display the web Use Netgear genie after Installation Upgrade Wireless Modem Router Firmware Wireless Modem Router Dashboard Basic Home Screen  To use WPS to join the wireless network Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup WPS Method Manual Method N750 Wireless Dual Band Gigabit Adsl Modem Router DGND4000 Netgear genie Basic Settings Does Your ISP Require a Login? Answer either yes or no Internet Basic SettingsInternet Basic Settings Screen Fields Internet IP Address Attached Devices Parental Controls USB Storage Basic Settings ReadySHARE USB Storage and Printer Basic Wireless Settings ReadySHARE Printer  To view or change basic wireless settings Wireless Settings Screen Fields Wireless Network Security Options Settings Change WPA Security Option and Passphrase  To set up a guest network Guest Networks Guest Network Wireless Security Options Netgear genie App  To install the genie mobile app Netgear genie Mobile App Netgear genie Advanced Home Setup Wizard N750 Wireless Dual Band Gigabit Adsl Modem Router DGND4000 Select either Push Button or PIN Number WPS Wizard To use the WPS Wizard VPN Wizard  To use the VPN Wizard N750 Wireless Dual Band Gigabit Adsl Modem Router DGND4000 Setup Menu Adsl Setup WAN Setup Change the MTU Size Default DMZ Server To set up a default DMZ server  To change the MTU size Select Advanced Setup WAN Setup Common MTU sizes LAN Setup  To change the LAN settings LAN TCP/IP Setup LAN Setup Screen SettingsUse the Wireless Modem Router as a Dhcp Server Use Router as a Dhcp Server Address Reservation  To reserve an IP address Quality of Service Setup Enable WMM QoS for Wireless Multimedia Applications  To create a QoS policy for applications and online games Set Up QoS for Internet AccessQoS for Applications and Online Gaming N750 Wireless Dual Band Gigabit Adsl Modem Router DGND4000 Click the Add Priority Rule button QoS for a Wireless Modem Router LAN PortQoS for a MAC Address Click Add Priority Rule Edit or Delete an Existing QoS Policy  To edit or delete a QoS policy USB Storage ReadySHARE Access USB Drive Requirements Store Files in a Central Location for Printing File-Sharing ScenariosShare Photos  To share files with your friends and family USB Storage Basic Settings Share Large Files over the Internet  To access your USB device Add or Edit a Network Folder USB Storage Advanced Settings Safely Remove a USB Drive Available Network Folders Media Server Settings Specify Approved USB Devices Connect to the USB Drive from a Remote Computer Select the Allow only approved devices check box ReadySHARE Cloud USB Printer Control USB Printer Control Control Center Configuration USB Printer Scan with a Multifunction Printer Security  To specify a trusted computer Keyword Blocking of Http Traffic To delete a keyword or domain Firewall Rules  To create firewall rules N750 Wireless Dual Band Gigabit Adsl Modem Router DGND4000 Add Custom Services to Allow or Block  To add a custom service TCP UDP TCP/UDP Schedule for Firewall Rules  To specify the firewall rule schedule  To set up email notifications Security Event Email Notifications Administration Upgrade the Wireless Modem Router Firmware Internet Port View Wireless Modem Router StatusRouter Information Show Statistics Button System up time and poll interval statistics Wireless Settings 2.4 GHz and 5 GHz Connection Status Button Guest Network 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access View VPN Status Manage the Configuration File  To restore configuration settings that you backed up Back Up SettingsRestore Configuration Settings Do not interrupt the reboot process Set Password Password Recovery Diagnostics N750 Wireless Dual Band Gigabit Adsl Modem Router DGND4000 Time Machine Set Up Time Machine To set up Time Machine Access the Connected USB Hard Drive  To access the drive Time Machine Before You Back Up a Large Amount of Data 101 Select Guid Partition Table or Master Boot Record MBR Change the Partition Scheme Advanced Settings Fine -tuning your network Advanced Wireless Settings 105 106 Wireless Repeating Function WDS Wireless repeating scenario Wireless Repeating Function Set Up the Base Station  To set up the base station Set Up a Repeater Unit  To configure the wireless modem router as a repeater unit Remote Computer Access Basics Port Forwarding and Triggering Port Triggering to Open Incoming Ports 113 Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers To set up port forwarding 116 Edit or Delete a Port Forwarding Entry Add a Custom ServiceClick Edit Service or Delete Service  To make a local web server public Set Up Port TriggeringApplication Example Making a Local Web Server Public 119 Dynamic DNS Static Routes  To set up Dynamic DNSSelect the Use a Dynamic DNS Service check box 122  To set up a static route Remote Management USB Settings Universal Plug and Play  To turn on Universal Plug and Play Traffic Meter  To set up an IPv6 Internet connection typeIPv6 128  To set up ReadySHARE Cloud Click Register 130 Device Mode VPN Policies 132 Add or Edit an Auto VPN Policy  To add or edit an Auto VPN Policy IKE Fully Qualified Domain Name. Your domain name Parameters Add or Edit a Manual VPN Policy  To add or edit a Manual VPN policy 137 Troubleshooting Quick Tips Wireless SettingsNetwork Settings Sequence to Restart Your Network Troubleshoot with the LEDs Power LED Is Off or BlinkingPower LED Stays Red Internet or Ethernet Port LEDs Are Off Wireless LEDs Are OffLEDs Never Turn Off Push N Connect WPS Button Blinks Green  To check the WAN IP address Cannot Access the InternetCannot Log In to the Router Select Administration Router Status  To troubleshoot a PPPoE connection Troubleshoot PPPoETroubleshoot Internet Browsing Incorrect Date or Time Wireless ConnectivityChanges Not Saved Wireless Signal Strength Restore the Factory Settings and PasswordTroubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router Test the Path from Your Computer to a Remote Device 148 Factory Settings Supplemental Information 150 Technical Specifications DGND4000 Router specifications Europe EU Declaration of Conformity Netgear Dual Band WirelessRegulatory Compliance Information 153 FCC Requirements for Operation in the United States FCC Caution Avertissement Industry CanadaImportant Note Radiation Exposure Statement Interference Reduction Table Index 158 159 160