GS748T Software User Manual
•Appendix C, “Network Cabling” gives cabling requirements and describes some details of port cabling connections.
Note: Refer to the product release notes for the GS748T switch Software application level code. The release notes detail the platform specific functionality of the Switching, SNMP, Config, and Management packages.
Note: Although this document applies to the NETGEAR® GS748T Smart Switch, some of the illustrations used may show references to other switch model numbers. Where such model numbers appear, the illustration concerned should be treated as an example. The procedures described with these illustrations apply to each of the family of Smart Switches.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical Conventions. This manual uses the following typographical conventions:
Italics | Emphasis, books, CDs, URL names |
|
|
Bold | User input |
|
|
Fixed | Screen text, file and server names, extensions, commands, IP addresses |
width |
|
•Formats. This manual uses the following formats to highlight special messages:
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
xii
