Reference Manual for the WG602 v2 54 Mbps Wireless Access Point

By default, the IP Address tab is open on this window.

Verify the following:

Obtain an IP address automatically is selected. If not selected, click in the radio button to the left of it to select it. This setting is required to enable the DHCP server to automatically assign an IP address.

Click OK to continue.

Restart the PC.

Repeat these steps for each PC with this version of Windows on your network.

Selecting the Windows Internet Access Method

1.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Internet Options icon.

3.Select “I want to set up my Internet connection manually” or “I want to connect through a Local Area Network” and click Next.

4.Select “I want to connect through a Local Area Network” and click Next.

5.Clear all check boxes in the LAN Internet Configuration screen and click Next.

6.Proceed to the end of the Wizard.

Verifying TCP/IP Properties for Windows 98 or Me

After your PC is configured and has rebooted, you can check the TCP/IP configuration using the utility winipcfg.exe:

1.On the Windows taskbar, click the Start button, and then click Run.

Preparing Your PCs for Network Access

D-5

M-10181-03

Page 101
Image 101
NETGEAR WG602 V2 manual Selecting the Windows Internet Access Method, Verifying TCP/IP Properties for Windows 98 or Me