Router Setup Manual
•LAN. A LAN light (5) should be lit. Green indicates your computer is communicating at 100 Mbps; amber indicates 10 Mbps. If a LAN light is not lit, check that the Ethernet cable from the computer to the router is securely attached at both ends, and that the computer is turned on.
For general information about the status lights, see “Router Front Panel” on page 3. For help if the status lights are not as described, see “Basic Functions Are Not Working” on page 20.
Accessing the Wireless Router after Installation
After installing your router manually, you must open a browser window and log in to the router to complete your wireless setup. If you installed using the Resource CD, you still need to log in to the router any time you wish to change settings.
To access the router using its login name and password:
1.Type http://www.routerlogin.net in the address field of your browser, and then press Enter.
Figure 9
Connect to the router by typing any one of these three URLs in the address field of your browser, then pressing Enter:
•http://www.routerlogin.net
•http://www.routerlogin.com
•http://192.168.1.1
10 | Getting to Know Your Wireless Router |
v1.0, July 2008
