Router Setup Manual
28 Default Configuration
v1.0, July 2008
Restoring the Default Password and Configuration Settings
You can restore the factory default configuration settings that reset the router’s user name to
admin, the password to password, and the IP address to 192.168.1.1.
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the router, for about 20 seconds, until the Test light begins
to blink (see “Router Back Panel” on page4).
2. Release the restore factory settings button, and wait for the router to restart, and for the Test
light to turn off.
The factory default settings will be restored so that you can access the router from your Web
browser using the factory defaults.
Interface Specifications
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: 10BASE-T or 100BASE-Tx, RJ-45
This procedure will erase all the current configuration settings and restore the factory
defaults.
Table2. Wireless Router Default Configuration Settings (continued)
Feature Default Setting