Wireless N150 Access Point WN604
Configure Wireless Access
To configure your wireless settings for 11b/bg/ng:
1. Select Configuration > Wireless. The Wireless Settings screen displays:
2.Enter the wireless settings for your area. See Wireless Settings on page 19.
3.Click Apply to save your settings.
When you have completed the setup steps, you can deploy the access point in your network. If needed, you can now reconfigure the computer that you set to use the static IP back to its original TCP/IP settings.
Deploy the Access Point
To deploy the access point:
1.Disconnect the access point and position it where it will be deployed. The best location is elevated, such as wall mounted or on the top of a cubicle, at the center of your wireless coverage area, and within line of sight of all the mobile devices.
2.Lift the antenna so that it is vertical.
Note: Refer to the antenna positioning and wireless mode configuration information in the Advanced Configuration chapter.
3.Connect an Ethernet cable from your access point to a LAN port on your router, switch, or hub.
Installation and Basic Configuration
17
