NETGEAR user manual Rear Panel, WN604 rear panel

Wireless N150 Access Point WN604

Rear Panel

	Power
Power	On/Off	LAN ports 1–4	Reset	Antenna

Figure 2. WN604 rear panel

During set up, use an Ethernet RJ-45 port to connect a computer. After initial set up, use an Ethernet port to connect to an Ethernet LAN through a device such as a hub, switch, router, or PoE switch.

The Reset button has two functions:

•Reboot. When pressed and released quickly, the access point restarts.

•Reset to Factory Defaults. This button can also be used to clear all data and restore all settings to the factory default values. See Factory Default Settings on page 60.

Getting Started

9