Installation and Basic Configuration
22
Wireless N150 Access Point WN604
To configure basic wireless QoS settings for 11b/bg/ng and 11a/na:
1. Select Configuration > Wireless > Basic > QoS Settings. The QoS Settings screen
displays:
2. Wi-FI Multimedia (WMM) is enabled by default. Select the Disable radio button to disable
WMM support.
3. WMM Power Save is enabled by default. Select the Disable radio button to disable WMM
power save.
4. Click Apply to save your settings
Set Up and Test Basic Wireless Connectivity
Follow these instructions to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your
needs.
Note: If you are configuring the access point from a wireless computer and
you change the SSID, channel, or security profile settings, you will
lose your wireless connection when you click Apply. To connect to
the wireless network, you have to change the wireless settings of
your computer to match the new settings.
To set up and test wireless connectivity:
1. Select Configuration > System. Verify that the correct country/region in which the
wireless interface will operate has been selected.
2. Click Apply to save any changes.
3. Select Configuration > Wireless.