Advanced QoS Settings | NETGEAR WN604 specs

Wireless N150 Access Point WN604

RIFS Transmission (11ng). Reduced interframe space transmission. RIFS transmissions are shorter than other interframe spaces, and if enabled allow transmission of successive frames at different transmit powers. The default is Disable.

DTIM Interval. The delivery traffic indication message specifies the data beacon rate between 1 and 255. The default is 3.

Preamble Type (11b/bg only). A long transmit preamble might provide a more reliable connection or a slightly longer range. A short transmit preamble gives better performance. The Auto settings automatically handles both long and short preambles. The default is Auto.

802.11d. Enable this option to include support for additional regulatory domains that are not in the current standard.

Max Wireless Clients. The number of wireless clients that can associate with the AP at one time. The default is 20.

Advanced QoS Settings

Wireless Multimedia Extension (WME) or Wi-Fi Multimedia (WMM) is a subset of the 802.11e standard. WME allows wireless traffic to have a range of priorities, depending on the type of data. Time-dependent information, such as video or audio, has a higher priority than normal traffic. For WME to function correctly, wireless clients also need to support WME.

For most networks, the default QoS queue parameter settings work well. Quality of Service provides you with the ability to specify parameters on multiple queues for increased throughput and better performance of differentiated wireless traffic, like Voice-over-IP (VoIP), other types of audio, video, and streaming media, as well as traditional IP data.

To configure advanced QoS settings

1.Select Configuration > Wireless > Advanced > QoS Settings. The QoS Settings screen displays:

Advanced Configuration

48

Image 48

NETGEAR WN604 user manual Advanced QoS Settings,  To configure advanced QoS settings

Contents

Wireless N150 Access Point WN604 Technical Support Contents Appendix a Supplemental Information Getting Started About the Access Point Compatible Netgear Switches System Requirements What’s In the BoxHardware Description Front Panel Front panel LEDs Rear Panel WN604 rear panel Side Panel Product Label Installation and Basic Configuration Log In to the Access Point  To log in to the access point Install the Access Point Configure the System Settings for Your Location  To set up the access point for your location Set the Time Set Basic IP Options  To configure the basic IP settings of your access point Configure Wireless Access Deploy the Access Point To configure your wireless settings for 11b/bg/ng  To deploy the access point Verify Wireless Connectivity Wireless Equipment Placement and Range Guidelines Wireless Settings Wireless Settings Screen Fields To configure the wireless settings Wireless N150 Access Point WN604 Configure Basic QoS Settings Set Up and Test Basic Wireless Connectivity  To set up and test wireless connectivitySelect Configuration Wireless Wireless N150 Access Point WN604 Configure Security  To configure a security profile Security ProfilesEdit Security Profile Screen Fields Authentication Settings Wireless Security Options Manually Configure Security Configure WPA2, or WPA2 + WPA, or WPA Configure WEP  To configure WEP data encryption Wi-Fi Protected Setup WPS  To configure WPS Use WPS to Add a Client to the Wireless Network  To add a client using the WPS button To add a client when logged in to the access point Restrict Wireless Access by MAC Address  To restrict access based on MAC addresses Management Upgrade the Wireless Access Point Firmware Configuration File Management  To back up your current settings  To restore the factory settings Change the Administrator Password  To change the administrator password Enable the SysLog Server Activity Log View Summary Information System Screen Fields  To access Statistics information Network Traffic Statistics Available Wireless Station Statistics Statistic Screen Fields  To view the available wireless stations Advanced Configuration Schedule the Wireless Radio Advanced Wireless Settings To schedule the wireless radio Advanced Wireless Settings Screen Fields Advanced QoS Settings  To configure advanced QoS settings Enable Wireless Bridging QoS queues and parameters  To configure bridging on your access point Select the Enable Wireless Bridging check box Wireless N150 Access Point WN604 Configure a Point-to-Point Bridge Wireless point-to-point bridge setup Configure a Point-to-Multi-Point Wireless Bridge Wireless point-to-multipoint bridge setup Wireless N150 Access Point WN604 Troubleshooting Troubleshooting with the LEDs WiFi LED Is OffAll LEDs Are Off Cannot Access the Internet or the LAN Wirelessly Cannot Connect to the Access Point to Configure ItLAN LED Is Off Time-Out Error Supplemental Information Factory Default Settings  To clear all data and restore the factory default values Auto Technical Specifications WN604 Technical Specifications Netgear Wireless Routers, Gateways, APs Notification of Compliance Notification of Compliance FCC Requirements for Operation in the United States Industry Canada Interference Reduction Table Wireless N150 Access Point WN604 Notification of Compliance