NETGEAR
6.For Security Options, select None.
7.Click Apply to save your changes.
Note: If you are configuring the router from a wireless computer and you change the router’s SSID, channel, or security settings, you will lose your wireless connection when you click Apply. You must then change the wireless settings of your computer to match the router’s new settings.
8.Select Wireless Settings under Advanced in the main menu of the WNR2000 router.
Figure
9.Make sure that the Enable Wireless Router Radio, Enable SSID Broadcast, and Enable WMM check boxes are selected.
10.Click Setup Access List.
11.Make sure that the Turn Access Control On check box is not selected.
12.Configure and test your wireless computer for wireless connectivity.
Program the wireless adapter of your computer to have the same SSID and channel that you specified in the router, and disable encryption. Check that your computer has a wireless link and can obtain an IP address by DHCP from the router.
Configuring Basic Connectivity |
