NETGEAR WNR2000-100NAS 1describes the router status fields, Wireless Router Status Fields

NETGEAR Wireless-N Router WNR2000 User Manual

Table 6-1describes the router status fields.

Table 6-1. Wireless Router Status Fields

Field		Description
Hardware Version		The hardware version of the router.
Firmware Version		The version of the current software installed in the router. This will
		change if you update your router.
Internet Port. The following settings apply to the Internet (WAN) port of the router.
	MAC Address	The Media Access Control address. This is the unique physical
		address being used by the Internet (WAN) port of the router.
	IP Address	The IP address being used by the Internet (WAN) port of the router. If
		no address is shown, or is 0.0.0.0, the router cannot connect to the
		Internet.
	DHCP	If set to None, the router is configured to use a fixed IP address on
		the WAN. If set to DHCP Client, the router is configured to obtain an
		IP address dynamically from the ISP.
	IP Subnet Mask	The IP subnet mask being used by the Internet (WAN) port of the
		router. For an explanation of subnet masks and subnet addressing,
		click the link to the online document “TCP/IP Networking Basics” in
		Appendix B.
	Domain Name Server	The Domain Name Server addresses being used by the router. A
		Domain Name Server translates human-language URLs such as
		www.netgear.com into IP addresses.
LAN Port. The following settings apply to the Ethernet (LAN) port of the router.
	MAC Address	The Media Access Control address. This is the unique physical
		address being used by the LAN port of the router.
	IP Address	The IP address being used by the Ethernet (LAN) port of the router.
		The default is 192.168.1.1.
	DHCP	Identifies whether the router’s built-in DHCP server is active for the
		LAN-attached devices.
	IP Subnet Mask	The IP subnet mask being used by the Ethernet (LAN) port of the
		router. The default is 255.255.255.0.

Using Network Monitoring Tools 6-3

v1.0, June 2008