BASIC CONFIGURATION FOR THE
NETOPIA
• Firmware: | .“7.5” (McLeodUSA bit sets) |
• ATM Circuit Encapsulation: | |
• ATM Circuit VPI: | .“0” |
• ATM Circuit VCI: | .“35” |
• ATM Circuit Multiplexing: | .“LLC/SNAP” |
• WAN IP Interfaces: | |
• Enable Interface: | .“ON” |
• Obtain IP Address Automatically: . . . . | .“ON” |
• Address Translation Enabled: | .If using private IPs “YES” |
| If using public IPs “NO” |
• IP Addressing: | .“Numbered” |
• Local WAN IP Address: | .“0.0.0.0” (obtained automatically |
| from DHCP server) |
• Local WAN IP Mask: | .“0.0.0.0” (obtained automatically |
| from DHCP server) |
• Ethernet IP: | .“192.168.1.1” (default for most |
| customers/Static IP customers: |
| see Account Information sheet) |
• Ethernet Subnet Mask: | .“255.255.255.0“ (default for most |
| customers/Static IP customers: |
| see Account Information sheet) |
• Domain Name: | .“mcleodusa.com” (obtained automatically |
| from DHCP server) |
• Primary Domain Name Server: | .“0.0.0.0” (obtained automatically from |
| DHCP server) |
• Secondary Domain Name Server: . . . . | .“0.0.0.0” (obtained automatically from |
| DHCP server) |
• Default IP Gateway | .“0.0.0.0” (obtained automatically from |
| DHCP server) |
• IP Address Serving: | .“ON” (default) |
• Number of Client IP Addresses: | .“100” (default) |
• First Client Address: | .“192.168.1.100” (default) |
• IP Address Serving: | .“OFF” (default) |
• Write Access Name: | .“admin” |
• Write Access Password: | .Mcdsl1 |
• WEP: | .“ON” |
• Wireless: | .“ON” |
25