INSTALLING THE MODEL 80 BUCK STOVE
Install unit as follows:
A.Carefully reinspect chimney connections, vent outputs and cabinet air intakes after finishing is completed.
B.Thoroughly clean all masonry mud and debris from cabinet and surrounding environment.
C.Ensure that Cabinet has not been damaged during masonry pro- cess.
D.Remove protective plastic wrapping from stove.
E.Inspect motor_and associated hardware for damage.
F.Slide the Buck Stove Model 80 into the Cabinet all the
way to the back so that the flue exit of stove lines up under stack.
G.Turn stack positioning nuts
to be lowered. Push downward and fit evenly until recessed within the flue exit opening (containing the damper).
lS
