User’s Manual
6.2.1.2 Motion
To configure the Motion Detection function of the DVR, click “MAIN” “Recording Functions” “Motion” to enter the Motion Detect Setup window.
Channel: Choose the channel you would like to configure to have specific motion detection function.
Motion Detection: Enable or Disable Motion Detection of the selected channel.
Sensitivity: Choose the level of sensitivity of motion detection. 1 is the least sensitive.
Detection Area: Click this button of the corresponding channel to select the area you want to have motion detection. The channel is separated into a 15*10 area. When any movements in the selected area are detected, recording or alarm will be triggered. The
Copy: Duplicate the setting of the selected channel to other channels
Red = Motion Detection Enabled
Clear = Motion Detection Disabled
NOTE: You can click and drag the mouse cursor when selecting/deselecting the motion area
.
6.2.1.3 Alarm
To configure the Alarm mode of each channel, click “Main Menu” “Record Settings” “Alarm” to enter into
“ALARM SETUP” menu.
Channel: Select the channel you would like to configure
Alarm settings
I/O Status: Select between “NO” (Normal Open), “NC” (Normal Close), and OFF depending on your external Alarm.
Copy To: Use the function to duplicate the same setting of one channel to another
17
