Nike + SPORTBAND Using the Sensor, About the Sensor’s Battery Life, Putting the Sensor to Sleep

Using the Sensor

About the Sensor’s Battery Life

The sensor contains a non-replaceable battery with a life of more than 1000 active hours. The sensor has a sophisticated built-in power management system which means that the sensor really only consumes power when active (that is, when it senses motion).

You can leave the sensor in your shoe when you aren’t working out, but if you plan to wear your shoes for a long time without working out, we recommend replacing the sen- sor with the foam insert to save battery life.

Note: You can buy a replacement sensor through

www.apple.com or at www.nikestore.com

Putting the Sensor to Sleep

The sensor is awake and on by default. If you want to store the sensor for a long period of time or make it stop transmitting, you can put it to sleep or take it out of your shoe.

To put the sensor to sleep:

Use a pen or a paper clip to press and hold the Sleep/Wake button for three seconds. (fig.45)

Important: Put the sensor to sleep before taking it on an aircraft, to comply with appli- cable government regulations.

To wake the sensor:

Use a pen or a paper clip to press the Sleep/Wake button.

fig.45, Nike+ Sensor

Sleep/Wake button

The Nike+ SportBand User’s Guide 28