Nikon 3699, 3700, 55 instruction manual 111

Autofocus	TTL phase detection, Nikon Multi-CAMS30 autofocus module with
	AF-Assist Illuminator (approx. 0.Sm-3m or 1.6-9 .8 ft.)
	• Detection range: EV - 1 to EV 19 (ISO 100, at normal temperature)
Lens servo	AF: Auto-Servo AF: camera automatically chooses Single Servo AF or
	Continuous Servo AF operation according to the subject status, i.e.
	stationary or moving.
	• Single Servo AF (focus is locked when the subject is in-focus)
	• Continuous Servo AF (camera continues to focus on a moving
	subject) Focus Tracking with Lock-OnTM automatically activated
	by subject'sstatus
	M: Manual focus
Focus area	One of three focus areas can be selected
Focus Area mode	• Dynamic AF Mode with Closest-Subject Priority
	• Dynamic AF Mode
	• Single Area with M focus mode
Metering system	TTL full-aperture exposure metering system
	Three metering systems selectable (limitations with lens used)
	• 3D five-segment Matrix Metering: with G- or D-type AF Nikkor
	• Five-segment Matrix Metering: with AF Nikkor other than G- or 0-
	type (except AF Nikkor for F3AF and IX-Nikkor), AI-P Nikkor
	• Center Partial Metering: automatically selected with Manual
	exposure mode
Metering range	3D Matrix Metering:	EV 1-20
	Center Partial Metering:	EV 1-20

(at normal temperature, ISO 1~O, f/ 1.4 lens)

Exposure meter coupling CPU

Exposure Compensation Exposure compensated in ± 2 EV range, in 1/2 steps (except in M, 8

	or Programmed Flash)
Auto Exposure	Bracketing range: ±2 EV; number of shots: three; bracketing
Bracket ing	steps: O.S, 1, 1.S or 2 EV (except in 8 or Vari-Program)

Film speed setting • Automatically set to ISO film speed of OX-coded film in use (manual not selectable)

•Film speed range: OX: ISO 2S-S000, automatically set to ISO 100 with non-OX-coded film

111