Changing battery for imprinting

1 Open camera back, remove the battery chamber cover for imprinting by removing the screw using a screwdriver.

2 Remove the used battery and insert a new CR2025 3V lithium battery with EEl side facing up. Attach the battery chamber cover by reinserting the screw.

• Use a pointed object to remove the battery.

NOTE: Battery requirements for imprinting

Imprinting of date/time requires one CR2025 3V lithium battery separate from the batteries required for the camera body. Battery life is approx. 3 years. When the imprinting on the photo appears faded and/or the display of the data imprint on the LCD becomes faint or disappears, this indicates low battery power. Replace the battery (making sure to set correct date/time after changing battery).

NOTE: Storing batteries

Keep the batteries out of children's reach . If swallowed, contact a doctor immediately. (For "Notes on Batteries", see page 102.)

23

Page 23
Image 23
Nikon 55, 3699, 3700 instruction manual Changing battery for imprinting