Film Rewind
This section explains
.rewind...................................................
~
0 _ E"~__ 1[
Mid-roll rewind
• To rewind film at
· 0 ___ ,0 __ , 0_ and then 0 appear in the LCD pane during film rewind and the frame counter counts backwards until rewind is complete.
• Film is completely rewound when a blinking E
~ shows in the frame counter. (E appears without blinking when the exposure meter is off.) Make sun E is blinking, open the camera back and remove th
@ film cartridge.
~"Q~:~ S\I
II "\"'"Tc:-.
E,,~1 :SJ
VEJ
~If film does not start to rewind or film
rewind stops at
@• When battery power is very low, or at low temperatures, film may not start rewinding or film rewind may stop at
~will blink in the LCD panel. In this case, turn the power switch off, change batteries, then turn the power switch on and press the two film rewind buttons El.!! simultaneously for approx. 1 sec. to rewind film again.
72