Connecting the USB Cable

Turn the computer on and wait for it to start up. After confirming that the camera is off, connect the UC-E6 USB cable as shown below. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.

UC-E6 USB cable

When the camera is turned on, the lens will extend andwill be displayed in the control panel. All controls except the power switch will be inactive.

Connecting the USB Cable

The camera digital I/O connector is on a slight angle.

Match this angle when connecting the USB cable.

More on Playback

Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE)

Do NOT select PTP when connecting the camera to a computer running one of the above operating systems. If the camera is connected to a computer running one of the above operating systems with PTP selected in the USB menu, the Windows hardware wizard will be displayed. Click Cancel to exit the wizard and then disconnect the camera. Be sure to select Mass storage before reconnecting the camera.

77

Page 87
Image 87
Nikon COOLPIX8800 manual Connecting the USB Cable, UC-E6 USB cable