Nikon D200KIT Attaching a Lens, Introduction-First Steps, Detaching Lenses, Aperture Ring

First Steps

Attaching a Lens

Care should be taken to prevent dust from entering the camera when the lens is removed.

Introduction—First Steps

1After confirming that the camera is off, remove the rear lens cap and camera body cap.

2 Keeping the mounting index on the lens aligned with the mounting index on the camera body, position the lens in the camera’s bayonet mount. Being careful not to press the lens-re- lease button, rotate the lens counter-clockwise until it clicks into place.

Mounting index

8

Detaching Lenses

Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold the lens-release button while turning the lens clockwise.

Aperture Ring

If the lens is equipped with an aperture ring, lock aperture at the minimum setting (highest f/-number). See the lens manual for details.