Nikon D70-series, D200BODY, D200OUTFIT, D200KIT, 17002 Custom Setting f4 Assign FUNC. Button

Setup

Custom Settings

Custom Setting f4: Assign FUNC. Button

This option controls the function performed by the FUNC. button.

Option	Description
FV Lock	If built-in flash or optional CLS-compatible Speedlight is used, flash value
(default)	locks when FUNC. button is pressed. Press again to cancel FV lock.
FV Lock/	As above, except that if built-in flash is lowered or optional CLS-compatible
Lens Data	Speedlight is not attached, FUNC. button and command dials can be used
	to specify focal length and aperture of non-CPU lenses ( 93).
1 Step Spd/	If FUNC. button is pressed when rotating command dials, changes to shut-
Aperture	ter speed (exposure modes S and M) and aperture (exposure modes A and
	M) are made in increments of 1 EV.
Same as	FUNC. button performs same functions as AE-L/AF-Lbutton.
AE-L/AF-L
Flash Off	Flash will not fire in photos taken while FUNC. button is pressed.
	While FUNC. button is pressed, all shots in exposure or flash bracketing
	program will be taken each time shutter-release button is pressed. In con-
Bracketing	tinuous high-speed and continuous low-speed modes, camera will repeat
Burst	bracketing burst while shutter-release button is held down. If white-bal-
	ance bracketing is selected, camera will take photos at up to 5 fps (single
	or continuous high-speed mode) or 1–4 fps (continuous low-speed mode)
	and perform white balance bracketing on each frame.
Matrix	Matrix metering activated while FUNC. button is pressed.
Metering
Center-	Center-weighted metering activated while FUNC. button is pressed.
Weighted
Spot	Spot metering activated while FUNC. button is pressed.
Metering
Focus Area	Press FUNC. button and rotate command dials to cycle between normal
Frame	and wide focus areas ( 56).

Custom Setting f5: Customize Command Dials

This option controls the operation of the main and sub- command dials.

170