87
Reference—Image Overlay and Multiple Exposure
6 Press the multi selector up or down to highlight
Done and press the multi selector to the right.
A icon will be displayed in the control panel.
7 Frame a photograph, focus, and shoot. In con-
tinuous high-speed or continuous low-speed
mode ( 26), the camera will record all expo-
sures in a single burst. In single-frame shooting
mode, one photograph will be taken each time the shutter-release but-
ton is pressed; continue shooting until all exposures have been recorded.
Shooting will end automatically if:
• No operations are performed for 30 s during shooting, or for 30 s after the
monitor has turned off during playback or menu operations
• The user selects Reset or Cancel in the mul-
tiple exposure menu and presses the multi se-
lector to the right
• The camera is turned off
• The battery is exhausted
• Pictures are deleted
If shooting ends before the specifi ed number of exposures have been
taken, a multiple exposure will be created from the exposures that have
been recorded to that point. If Auto Gain is on, gain will be adjusted to
refl ec t the number of exposures actually recorded. To end shooting with-
out creating a multiple exposure, press the button while turning the
camera off .
The icon will blink until shooting ends.
When shooting ends, multiple exposure mode
will end and the icon will no longer be dis-
played. Repeat steps 1–7 to take additional mul-
tiple exposures.