Nikon D70-series, D200BODY, D200OUTFIT Exposure Bracketing, Resuming Exposure or Flash Bracketing

Exposure Bracketing

The camera modifies exposure by varying shutter speed and aperture (programmed auto), aperture (shutter-priority auto), or shutter speed (aperture-priority auto, manual exposure mode). When On is selected for Custom Setting b1 (ISO Auto), the camera will automatically vary ISO sensitivity for optimum exposure when the limits of the cam- era exposure system are exceeded. If Custom Setting e5 (Auto BKT Set) is set AE Only or to AE & Flash and On is selected for Custom Setting b1 (ISO Auto), the camera will vary ISO sensitivity without varying shutter speed or aperture, regardless of the setting chosen for Custom Setting e6 (see below).

Shooting Mode

In single frame and self-timer modes, one shot will be taken each time the shutter-release button is pressed. In continuous low speed and continuous high speed modes, shooting will pause after the number of shots specified in the bracketing program have been taken. Shooting will resume the next time the shutter-release button is pressed.

Resuming Exposure or Flash Bracketing

If the memory card fills before all shots in the sequence have been taken, shooting can be resumed from the next shot in the sequence after the memory card has been replaced or shots have been deleted to make room on the memory card. If the camera is turned off before all shots in the sequence have been taken, bracketing will resume from the next shot in the sequence when the camera is turned on.

e6—Manual Mode Bkting ( 167)

This option controls how the camera performs exposure and flash bracketing in manual exposure mode. Bracketing can be performed by varying flash level together with shutter speed and/or aperture, or by varying flash level alone.

e7—Auto BKT Order ( 167)

This option can be used to change the bracketing order.

Reference—Exposure

75