Nikon 17002, D70-series, D200BODY, D200OUTFIT, D200KIT Attaching the Camera Strap, Monitor Cover

Attaching the Camera Strap

Attach the strap as shown below.

The Monitor Cover

A clear plastic cover (the BM-6 LCD monitor cover) is pro- vided with the camera to keep the monitor clean and protect it when the camera is not in use. To attach the cover, insert the projection on the top of the cover into the matching indentation above the camera monitor (￿), then press the bottom of the cover until it clicks into place (￿).

To remove the cover, hold the camera firmly and pull the bottom of the cover gently outwards as shown at right.

Introduction—First Steps

9