Nikon D200KIT, D70-series, D200BODY, D200OUTFIT, 17002 158, Custom Setting d2 Viewfinder Grid Display

Setup

Custom Settings

Custom Setting d1: Beep

Controls the pitch of the beep that sounds when the self- timer is counting down or the camera focuses in single- servo AF with Focus (the default setting) selected for Cus- tom Setting a2 (AF-S Mode Priority). Choose from High (the default option), Low, and Off.

Aicon appears in the control panel when High or Low

is selected.

Custom Setting d2: Viewfinder Grid Display

Select On to display on-demand grid lines in the view- finder ( 6). The default option is Off.

Custom Setting d3: Viewfinder Warning Display

Select On (the default option) to display a warning in the viewfinder when the battery is low, no memory card is in- serted, or when shooting in black-and-white. No warning is displayed when Off is selected; before shooting, check indicators in the control panel.

Custom Setting d4: CL-Mode Shooting Speed

This option determines the rate at which photographs can be taken in CL (continuous low-speed) mode (during interval timer photography, this setting also determines the frame advance rate for single-frame and mirror-up modes). Shooting speed can be set to values between 1 and 4 frames per second (fps); the default value is 3 fps. The frame advance rate may drop at slow shutter speeds.

Custom Setting d5: Exposure Delay Mode

Select On to delay shutter release until about 0.4 s after the shutter-release button is pressed, reducing camera shake in situations in which the least camera movement could result in blurred photographs (for example, micro- scope photography). The default option is Off.

158