Reference—Flash Photography

80

Flash Exposure Compensation

Flash exposure compensation can be used to increase or reduce flash output from the level chosen by the camera’s flash control system. Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections. As a rule of thumb, positive compensation may be needed when the main subject is darker than the background, negative compensation when the main subject is brighter than the background.

Pressing the button, rotate the sub-command dial and confirm flash exposure compensation in the control panel or viewfinder. Flash exposure compen- sation can be set to values between –3 EV (darker) and +1 EV (brighter) in increments of / EV.

At values other than ±0, a icon will be displayed

in the control panel and viewfinder after you release

the button. The current value for flash exposure compensation can be confirmed by pressing the button.

Normal flash output can be restored by setting flash exposure compensation to ±0.0 or performing a two button reset ( 97). Flash exposure compensation is not reset when the camera is turned off.

Using Flash Exposure Compensation with Optional Speedlights

Flash exposure compensation is also available when an optional SB-800 or SB-600 Speedlight is attached.

Modeling Illumination

The built-in flash and optional SB-800, SB-600, and SB-R200 Speedlights emit a model- ing flash when the camera depth-of-field preview button is pressed. Modeling illumi- nation can be turned off using Custom Setting e4 (Modeling Flash; 166).

b3—EV Step ( 154)

This option can be used to set the increments for flash compensation to / or 1 EV.

Page 90
Image 90
Nikon D70-series, D200BODY, D200KIT Using Flash Exposure Compensation with Optional Speedlights, Modeling Illumination