Nikon D200OUTFIT Connecting to a Computer, 107, Before Connecting the Camera, Operating system

Connecting to a Computer

The supplied USB cable can be used to connect the camera to a computer. Once the camera is connected, the supplied software can be used to copy pho- tographs to the computer, where they can be browsed, viewed, and retouched. The camera can also be used with Nikon Capture 4 Version 4.4 or later (available separately), which supports batch processing and more advanced image editing options and can be used to control the camera directly from the computer.

Before Connecting the Camera

Install the necessary software after reading the manuals and reviewing the sys- tem requirements. To ensure that data transfer is not interrupted, be sure the camera battery is fully charged. If in doubt, charge the battery before use or use an EH-6 AC adapter (available separately).

Before connecting the camera, set the USB option in the setup menu ( 121) according to the computer operating system and whether the camera is being controlled from Nikon Capture 4 Version 4.4 or later (available separately) or photographs are being trans- ferred to the computer using the supplied software:

Operating system	Supplied software	Nikon Capture 4 Camera Control
Windows XP Home Edition	Choose PTP or Mass
Windows XP Professional
	Storage
Mac OS X
Windows 2000 Professional		Choose PTP
Windows Millennium Edition (Me)	Choose Mass Storage*
Windows 98 Second Edition (SE)
Mac OS 9	Not supported

*Do NOT select PTP. If PTP is selected when the camera is connected, the Windows hard- ware wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera. Be sure to select Mass Storage before reconnecting the camera.

Reference—Connecting to a Computer

107