Reference—Connecting to a Computer

108

Connecting the USB Cable

1Turn the computer on and wait for it to start up.

2 Turn the camera off.

3Connect the UC-E4 USB cable as shown. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.

4

Turn the camera on. If Mass Storage is selected

 

for USB, will be displayed in the control panel

and viewfinder, and the PC mode indicator will flash (if PTP is selected, the camera displays will not change). Photographs can be transferred to the computer as described in the manual for the supplied software (on CD).

If Nikon Capture 4 Camera Control is running, the control panel will showin place of the number of exposures remaining. Any photo- graphs taken will be recorded to the computer hard disk rather than the camera memory card. See Nikon Capture 4 User’s Manual for more infor- mation.

During Transfer

Do not turn the camera off while transfer is in progress.

Page 118
Image 118
Nikon D200KIT, D70-series 108, Connecting the USB Cable, For USB, will be displayed in the control panel, During Transfer