Return to Master TOC
TROUBLESHOOTING & REPAIR |
NORMAL OPEN CIRCUIT VOLTAGE WAVEFORM
DC TIG MODE
CAUTION
HIGH VOLTAGE / HIGH FREQUENCY can damage test equipment.
•Perform all voltage and waveform checks with high frequency circuit OFF.
•Perform High Frequency Disable Procedure.
____________________________________________________________________
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
50 V
This is the typical DC (+) output voltage waveform generated from a properly operat- ing machine. Note that each vertical division represents 50 volts and that each horizontal division represents 2 milliseconds in time.
Note: Scope probes connected at machine
output terminals: (+) probe to electrode,
0 V
2 ms
SCOPE SETTINGS
Volts/Div | 50 V/Div. |
Horizontal Sweep | 2 ms/Div. |
Coupling | DC |
Trigger | Internal |
|
|
