INSTALLATION |
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
A
WARNING
To avoid receiving a high frequency shock, keep the TIG torch and cables in good condition.
WORK CABLE CONNECTION
A work cable with attached work clamp is factory con- nected to the PRECISION TIG 185. To minimize high frequency interference, refer to Machine Grounding and High Frequency Interference Protection section of this manual for the proper procedure on grounding the work clamp and work piece.
SHIELDING GAS CONNECTION
An adjustable gas pressure regulator with flow gage and hose is supplied with the PRECISION TIG 185
The available
WARNING
CYLINDER could explode
if damaged.
• Keep cylinder upright and chained to a support.
•Keep cylinder away from areas where it could be damaged.
•Never allow the torch to touch the cylinder.
•Keep cylinder away from live electrical circuits.
•Maximum inlet pressure 150 psi.
A cylinder is loaded by leaning it slightly sideways and rocking it up on the platform, being careful not to allow the
REMOTE CONTROL CONNECTION
A remote control receptacle is provided on the case front of the welder for connecting a remote control to to the machine. A Foot Amptrol™, foot activated remote control, is included with the PRECISION TIG 185
CONNECTIONS FOR STICK (SMAW) WELDING
STICK ELECTRODE CABLE AND WORK CABLE CONNECTION
Refer to Field Installed Options in Accessories Section of this manual for STICK welding equipment which is available for use with the PRECISION TIG 185. An electrode holder with
PRECISION TIG 185
