Setup Menu

Basic Camera Setup

kAuto Off

Press the d button M z(Setup menu) (A 94) M kAuto off

When the camera is on and a period of time passes without any operations, the camera will enter standby mode (A 15) to save power.

Once the camera has entered standby mode, the power-on lamp will blink. If no operations are performed for another three minutes, the camera will turn off. Use this option to set time before camera enters standby mode.

Auto off

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s (default setting), 1 min, 5 min, and 30 min.

Sleep mode

If On (default setting) is selected, the camera will enter standby mode when there is no change in the brightness of the subject, even before the time selected in the

auto off menu has elapsed. The camera will enter sleep mode after 30 seconds when Auto off is set to 1 min or less, or after 1 minute when Auto off is set to 5 min or more.

BNotes on Auto Off

The time allowed to elapse before the camera enters standby mode is fixed in the following cases:

While menus are displayed: 3 minutes

While slide show is in progress: Up to 30 minutes

CExiting Standby Mode

Press one of the following buttons to exit standby mode.

Power switch

Shutter-release button

A button

c button

108 • b (movie-record) button

Page 120
Image 120
Nikon COOLPIXL110BK KAuto Off, Exiting Standby Mode, Press the d button M zSetup menu a 94 M kAuto off, Sleep mode