Nikon COOLPIXL110BK, COOLPIXL110RED Troubleshooting, Display, Settings and Power Supply, 128

Troubleshooting

If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Refer to the page numbers in the right-most column for more information.

Display, Settings and Power Supply

	Problem		Cause/Solution	A
	Monitor is blank	•	Camera is off.	20
		•	Battery exhausted.	20
		•	Standby mode for saving power: press the	15, 24
		•	shutter-release button halfway.
			When flash lamp blinks red, wait until flash has	30
		•	charged.
			Camera and computer are connected via USB	83
		•	cable.
			Camera and TV are connected via AV cable or	80
			HDMI cable.
	Monitor is hard to read	•	Adjust monitor brightness.	101
		•	Monitor is dirty. Clean monitor.	120
	Camera turns off without	•	Battery exhausted.	20
	warning	•	Camera has turned off automatically to save	108
		•	power.
			Battery is cold.	119
	Date and time of recording are	•	Images taken while the clock is not set will	16
	not correct		have a time stamp of “00/00/0000 00:00”;
			movies will be dated “01/ 01/2010 00:00”. Set
			the correct date and time using Date in the
Technical		•	setup menu.
			Check camera clock regularly against more	98
			accurate timepieces and reset as required.
Notes	No indicators displayed in	Hide info is selected for Photo info.		101
	monitor	Select Show info.
	Date imprint not available	Camera clock has not been set.		16, 98
	Date not being displayed on	•	Date imprint cannot be used with the current
	images even when Date	•	shooting mode.
	imprint is enabled		A feature that cannot be used with date	103
			imprint is selected.
		• Date imprint cannot be used when recording
			movies.
	Camera settings reset	The clock battery is exhausted; all settings were		99
		restored to their default values.

128