Nikon COOLPIXL110BK GVibration Reduction, Using Vibration Reduction with Movies, On hybrid

Setup Menu

Basic Camera Setup

gVibration Reduction

Press the d button M z(Setup menu) (A 94) M gVibration reduction

Specify the vibration reduction setting for shooting still images. Vibration reduction effectively corrects blur that commonly occurs when shooting with zooming or at slow shutter speeds. Set vibration reduction to Off when using a tripod to stabilize the camera during shooting.

VOn (hybrid)

Image-sensor shift vibration reduction reduces the effects of camera shake. Additionally, electronic vibration reduction is used to process images and remove the effects of camera shake in the following situations.

•When the flash does not fire

•When a shutter speed slower than 1/60 seconds is used

•When Self-timeris disabled

•When Continuous is set to Single

•When ISO sensitivity is set to 200 or less

gOn (default setting)

Image-sensor shift vibration reduction reduces the effects of camera shake.

Off

Vibration reduction is not used.

The vibration reduction setting can be confirmed in the monitor during shooting (A 8, 21) (When it is set to Off, no icon is displayed).

BNotes on Vibration reduction

•Vibration reduction may take a few seconds to activate after the power is turned on, or the camera enters shooting mode from playback mode. Wait until the display stabilizes before shooting.

•Due to characteristics of the vibration reduction function, images displayed on the camera’s monitor immediately after shooting may appear blurry.

•Vibration reduction may be unable to completely eliminate the effects of camera shaking in some situations.

•When set to On (hybrid), electronic vibration reduction may not reduce the effects of camera shake if the amount of vibration is very small or very large.

•When set to On (hybrid), electronic vibration reduction does not function if shutter speed is fast or very slow.

•When set to On (hybrid), the camera automatically releases the shutter two times for each shot and processes the image, therefore it takes more time to save captured images. The Shutter sound (A 107) will be heard only once. Only one image is saved.

DUsing Vibration Reduction with Movies

When recording movies, electronic vibration reduction is used automatically to reduce the effects of

104camera shake.