Nikon COOLPIXL110RED, COOLPIXL110BK, Coolpix L110 user manual 130

Troubleshooting

	Problem	Cause/Solution	A
	Bright specks appear in images	Flash is reflecting off particles in air. Lower the	6, 29
	taken with flash.	built-in flash or set flash mode to W (Off).
	Flash does not fire.	• The built-in flash is lowered, or flash mode is	6, 29
		set to W(Off).
		• Some scene modes that cannot turn on flash	35
		are selected.
		• Sport continuous mode is selected.	46
		• A feature that cannot be used with the flash is	58
		selected.
	Digital zoom cannot be used.	Digital zoom cannot be used in the following
		situations.
		• When Portrait or Night portrait is selected	36, 37
		for Scene mode.
		• When smart portrait mode is selected.	44
		• When Multi-shot 16 is selected for	55
		Continuous.
		• When recording movies	73
	Image mode not available.	• A feature that cannot be used with image	58
		mode is selected.
		• Available image modes differ according to the	51
		current shooting mode.
	No sound when shutter is	• Off is selected for Sound settings > Shutter	107
	released.	sound in setup menu.
		• Do not block the speaker.	4
	AF-assist illuminator does not	• Off is selected for AF assist option in camera	106
Technical	light.	setup menu.	120
	Images appear smeared.	Lens is dirty. Clean lens.
		• AF-assist illuminator turns off automatically in	36-41
		some scene modes.
Notes
	Hues are unnatural.	White balance does not match light source.	53
	Randomly spaced bright pixels	The subject is dark, so shutter speed is too slow
	(“noise”) appear in image.	or ISO sensitivity is too high.
		• Noise can be reduced by using flash.	29
		• Select a lower ISO sensitivity.	56
	Images are too dark	• The built-in flash is lowered, or flash mode is	6, 29
	(underexposed).	set to W(Off).
		• Flash window is blocked.	22
		• Subject is beyond flash range.	29
		• Adjust exposure compensation.	33
		• Raise the ISO sensitivity.	56
		• Subject is backlit. Select the Backlight scene	29, 41
		mode, or set the flash mode to X(fill flash).

130