Nikon L110 user manual Shutter is automatically released, Exit smart portrait mode by pressing a

Capturing Smiling Faces Automatically (Smart Portrait Mode)

The camera detects a smiling face to shoot the face automatically.

1 Press Ain shooting mode to display the shooting-mode selection menu and use the multi selector Hor Ito select Fand press k.

The camera enters smart portrait mode.

Smart portrait

More on Shooting

2 Frame the picture.

• Raise the built-in flash when using the flash.

• Point the camera at the subject.

•If the camera detects a person’s face, the face is framed

by a double yellow border in the focus area, and when
the face comes into focus, the double border turns	1/125 F3.5
green for a moment and the focus is locked.

•Up to three faces can be detected. When the camera detects more than one face, the face nearest the center of the screen is framed by a double border in the focus area and the other faces are framed by a single border.

3 The shutter is automatically released.

•If the camera detects the smiling face of the person framed by a double border, the shutter is automatically released.

•The self-timer lamp (A 4) blinks when the camera detects a face, and it flickers immediately after the shutter is released. Each time the shutter is released, the camera again begins face detection and smile detection operations for continuous automatic shooting.

•Pictures can also be taken by pressing the shutter-release button. If the camera does not detect any faces, the camera focuses on the subject in the center of the frame.

4 Exit smart portrait mode by pressing A.

Change to another shooting mode.

44