Setup Menu

Basic Camera Setup

Auto Off

dbutton M z(Setup menu) (A104) M Auto off

If no operations are performed for a specified amount of time, the monitor turns off and the camera enters standby mode (A 15).

Use this option to set the amount of time that passes before the camera enters standby mode.

Auto off

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s (default setting), 1 min, 5 min, and 30 min.

Sleep mode

If On (default setting) is selected, the camera will enter standby mode when there is no change in the brightness of the subject, even before the time selected in the auto off menu has elapsed. The camera will enter sleep mode after 30 seconds when Auto off is set to 1 min or less, or after 1 minute when Auto off is set to 5 min or more.

CWhen the Monitor Has Turned Off to Save Power

When the camera is in standby mode, the power-on lamp flashes.

If no operations are performed for another three minutes, the camera will turn off automatically.

When the power-on lamp is flashing, pressing the following buttons will turn the monitor back on. Power switch, shutter-release button, A button, c button, or b (e movie-record) button

CAuto Off

The time allowed to elapse before the camera enters standby mode is fixed in the following situations:

While menus are displayed: 3 minutes

116 During slide show playback: Up to 30 minutes

Page 128
Image 128
Nikon L310, 26331 user manual Auto Off, Dbutton M zSetup menu A104 M Auto off