Nikon L310, 26331 Inserting the Batteries, Applicable Batteries, Turning On and Off the Camera

First Steps

Inserting the Batteries

First Steps

1Open the battery-chamber/memory card slot cover.

Before opening the battery-chamber/memory card slot cover, hold the camera upside down to prevent the batteries from falling out.

The camera, batteries or memory card may be hot immediately after using the camera. Observe caution when removing the batteries or memory card.

3

1

2

2Insert the Batteries

Confirm that the positive (+) and negative (-) terminals are oriented correctly as described on the label at the entrance of the battery chamber, and insert the batteries.

3Close the battery-chamber/memory card slot cover.

Slide the cover while securely holding down the area marked 2.

1

2

3

Applicable Batteries

•Four LR6/L40 (AA-size) alkaline batteries (batteries supplied)

•Four FR6/L91 (AA-size) lithium batteries

•Four EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries * EN-MH1 rechargeable Ni-MH batteries cannot be used.

Turning On and Off the Camera

Remove the lens cap, and then press the power switch to turn on the camera. The power-on lamp (green) will light, and then the monitor will turn on (the power-on lamp turns off when the monitor turns on).

Press the power switch again to turn the camera off. When the camera turns off, both the power-on lamp and monitor turn off.

If the camera is turned off, hold down the c button

14to turn the camera on in playback mode (A 26).