Nikon 6MN14111-02, L820 Black, L820 Red, COOLPIXL820BLK, CT2L02(11) manual E90

	Display	Cause/Solution	A
		The lens cap may be attached, or a lens error has occurred.
		Make sure that the lens cap has been removed, then turn the
	Lens error	camera on again. If the error persists even after the camera is	4, 22
		turned off and then on again, contact retailer or Nikon-
		authorized service representative.
	Communications error	Error occurred during communication with printer.	E24
		Turn camera off and reconnect USB cable.
		Error has occurred in camera’s internal circuitry.
	System error	Turn camera off, remove and reinsert batteries, and turn	14, 23
		camera on. If error persists, contact retailer or Nikon-
		authorized service representative.
	Printer error: check	Printer error.
		Check printer. After solving the problem, select Resume and	–
	printer status.
		then press the k button to resume printing.*
	Printer error: check	Specified size of paper is not loaded in printer.
		Load the specified size of paper, select Resume, and then	–
	paper
		press the k button to resume printing.*
		Paper has jammed in printer.
Reference	Printer error: paper jam	Remove the jammed paper, select Resume, and then press	–
		Load the specified size of paper, select Resume, and then	–
		the k button to resume printing.*
	Printer error: out of	No paper is loaded in printer.
Section	paper	press the k button to resume printing.*
		Ink error.
	Printer error: check ink	Check ink, select Resume, and then press the k button to	–
		resume printing.*
		Running out of ink or ink cartridge is empty.
	Printer error: out of ink	Replace ink cartridge, select Resume, and then press the	–
		k button to resume printing.*

E90