Nikon COOLPIXL820BLK Hide info is selected for Photo info, Select Show info, Support Print date

Problem	Cause/Solution	A
Monitor content is hard to	• Adjust monitor brightness.	96, E63
see.	• Monitor is dirty. Clean monitor.	F6
	• If camera clock has not been set, Oflashes when
	shooting images and recording movies. Images
	and movies saved before clock is set are dated “00/
Date and time of recording	00/0000 00:00” or “01/01/2013 00:00” respectively.	18, 96,
are not correct.	Set the correct time and date using Time zone	E60
	and date in the setup menu.
	• Check camera clock regularly against more
	accurate timepieces and reset as required.
No indicators displayed in	Hide info is selected for Photo info.	96, E63
monitor.	Select Show info.
Print date not available.	Time zone and date in the setup menu has not	18, 96,
	been set.	E60
Date not imprinted on	• The current shooting mode is one that does not
images even when Print	support Print date.	96, E65
date is enabled.	• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when	Clock battery is exhausted; all settings were restored	18, 21
camera is turned on.	to their default values.		Technical
Camera settings reset.
	The camera may become hot when recording movies
Camera becomes hot.	or uploading images from an Eye-Fi card for an	–	Notes
	extended period of time, or when the camera is used
	in a hot area; this is not a malfunction.		and Index

F9