Nikon L820 Black, L820 Red, COOLPIXL820BLK, 6MN14111-02, CT2L02(11) manual Camera Temperature

B Notes About Saving Data

After taking pictures or recording movies, the number of exposures remaining or the remaining recording time flashes while images or movies are being saved. Do not open the battery- chamber/memory card slot cover. Image and movie data could be lost and the camera or memory card could be damaged.

B Notes About Movie Recording

•Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording movies (F20). Movie recording may stop unexpectedly when memory cards with a lower Speed Class rating are used.

•Image quality degrades when digital zoom is used. When recording ends, digital zoom turns off.

•The sounds of zoom control operation, zoom, autofocus lens drive movement, vibration reduction, and aperture operation when brightness changes may be recorded.

•The following phenomena may be seen in the monitor while recording movies. These phenomena are saved in the recorded movies.

-Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor lighting.

-Subjects that move quickly from one side of the frame to the other, such as a moving train or car, may appear skewed.

-The entire movie image may be skewed when the camera is panned.

-Lighting or other bright areas may leave residual images when the camera is moved.

•Depending on the distance to the subject or the amount of zoom applied, subjects with repeating patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.) in them during movie recording and playback. This occurs when the pattern in the subject and the layout of the image sensor interfere with each other; it is not a malfunction.

B Camera Temperature

•The camera may become warm when recording movies for an extended period of time or when the camera is used in a hot area.

Recording and Playing Back Movies

•If the inside of the camera becomes too hot when recording movies, the camera may automatically stop recording after 10 seconds in order to prevent damage to the camera.

The amount of time remaining until the camera stops recording (B10 s) is displayed.

When the camera stops recording, it turns itself off.

Leave the camera off until the inside of the camera has cooled.

1 0 s

1 4 m 3 0 s

89