WPS (Android Only)1Enable the camera’s built-in Wi-Fi.

Highlight Wi-Fiin the setup menu and press 2. Highlight Network connection and press 2, then highlight Enable and press J. Wait a few seconds for Wi-Fi to activate.

2Connect.

Enable WPS button connections on the camera and smart device:

Camera: Highlight Network settings and press 2.

Highlight Push-button WPS and press 2 to ready the camera for a WPS connection. The camera will wait about two minutes for a WPS connection request from the smart

device. To extend the wait time, press J.

Smart device: Select Wi-Fi settings > WPS button connection.
226Wi-Fi