Memory card access lamp
Focus point
3Focus.

Press the shutter-release

button halfway. The focus

point will flash green while the camera focuses. If the

camera is able to focus, the focus point will be

displayed in green; if the camera is unable to focus, the focus point will flash red.

4Take the picture.

Press the shutter-release button the rest of the way down. The monitor turns off and the memory card access lamp lights during

recording. Do not eject the memory card or remove or disconnect the power source until the lamp has gone out and recording is complete.

When recording is complete, the photograph

will be displayed in the monitor for a few seconds.

Rotate the live view switch to exit live view.

46“Point-and-Shoot” Modes (iand j)