Caring for the Camera

Storage

When the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that:

•are poorly ventilated or subject to humidities of over 60%

•are next to equipment that produces strong electromagnetic fields, such as televisions or radios

•are exposed to temperatures above 50 °C (122 °F) or below –10 °C (14 °F)

Cleaning

Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach

or seaside, wipe off sand or salt with a cloth lightly Camera body dampened in distilled water and dry thoroughly. Important:

Dust or other foreign matter inside the camera may cause damage not covered under warranty.

These glass elements are easily damaged. Remove dust Lens, mirror, and lint with a blower. If using an aerosol blower, keep the

and can vertical to prevent the discharge of liquid. To remove viewfinder fingerprints and other stains, apply a small amount of lens

Monitor

cleaner to a soft cloth and clean with care.

Remove dust and lint with a blower. When removing fingerprints and other stains, wipe the surface lightly with a soft cloth or chamois leather. Do not apply pressure, as this could result in damage or malfunction.

Do not use alcohol, thinner, or other volatile chemicals.

Technical Notes 337