GB 16
Write-protect switch
❚❚Removing the Battery and Memory CardsRemoving the Battery

Turn the camera off and open the battery- chamber cover. Press the battery latch in the direction shown by the arrow to release the battery and then remove the battery by hand.

Removing Memory Cards

After confirming that the memory card access lamp is off, turn the camera off, open the memory card slot cover, and press the card in to eject it (q). The card can then be removed by hand (w).

GB 16

AThe Write Protect Switch

SD memory cards are equipped

with a write protect switch to prevent accidental loss of data. When this switch is in the “lock”

position, the memory card can not be formatted and photos can not

be deleted or recorded (a beep will sound if you attempt to release the shutter). To unlock the memory card, slide the switch to the “write” position.

Introduction 35