❚❚“Clean at Startup/Shutdown”

1Select Clean at startup/shutdown. Select Clean image sensor, then

highlight Clean at startup/ shutdown and press 2.2Select an option.

Highlight an option and press J. Choose from Clean at startup, Clean at shutdown, Clean at startup & shutdown, and Cleaning off.

DImage Sensor Cleaning

Using camera controls during startup interrupts image sensor cleaning.

Cleaning is performed by vibrating the image sensor. If dust can not be fully removed using the options in the Clean image sensor menu, clean the image sensor manually (0 340) or consult a Nikon- authorized service representative.

If image sensor cleaning is performed several times in succession, image sensor cleaning may be temporarily disabled to protect the camera’s internal circuitry. Cleaning can be performed again after a short wait.

Technical Notes 339