Nikon N1405 f3: Assign Touch Fn, 268ACustom Settings: Fine-TuningCamera Settings

f3: Assign Touch Fn

Gbutton ➜ ACustom Settings menu

A touch-sensitive area of the monitor can be used to control the camera after the monitor has turned off automatically. The position of this “touch Fn” area varies with the position of the monitor; the role it plays can be chosen from the options in the table below. Slide your finger left or right across the area indicated in the illustration to adjust the chosen option (note that touch Fn is not available when the monitor is facing forward). If you find that your face contacts the touch Fn area when you look through the viewfinder, use the monitor in the extended position.

Touch Fn area

Monitor in normal position	Monitor extended
Option	Description
When an option other than e(Auto-area AF) is

#Focus-pointselected for AF-area mode, you can slide a finger selection over the touch Fn area to position the focus point

(0 85).

w	ISO	Slide a finger over the touch Fn area to adjust ISO
	sensitivity	sensitivity (0 99).
	Active	Slide a finger over the touch Fn area to adjust
!		Active D-Lighting (P, S, A, and M modes only;
	D-Lighting
		0 133).
$ HDR		Slide a finger over the touch Fn area to adjust HDR
		(P, S, A, and M modes only; 0 135).

268ACustom Settings: Fine-Tuning Camera Settings